LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1999 >> Rodeo S 2WD V6-3.2L >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor >> Service and Repair >> Blower Assembly

Blower Assembly

Blower Assembly And Associated Parts:




Blower Assembly and Associated Parts

Removal

1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant (with air conditioning).
3. Remove instrument panel assembly.
4. Disconnect resistor connector.
5. Remove duct.
6. Remove evaporator assembly (A/C only).
7. Disconnect blower motor connector.
8. Remove blower assembly.

Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Adjust the control cables.