Amigo, Rodeo 3.2L & Trooper
- Disconnect generator connector. Turn ignition switch to ON position. Use DVOM to measure voltage between ground and generator connector terminal "L" (White/Blue wire) and ground. Also measure generator connector terminal "IG" (Black/Yellow wire). If battery voltage is indicated, go to next step. If battery voltage is not indicated, check for blown METER or ENGINE IG. fuse in dash fuse box. If fuses are okay, check for open in Black/Yellow wire between generator connector terminal "IG" and dash fuse box, White/Blue wire between generator connector terminal "L" and instrument panel or Yellow wire between instrument panel and dash fuse box. See WIRING DIAGRAMS . Repair if necessary.
- Reconnect generator connector and start engine. Make sure ALL accessories and equipment are off. Use DVOM and measure battery voltage while engine is idling. If reading is greater than 16 volts, replace generator. Connect DVOM in ammeter mode to output terminal of generator. See WIRING DIAGRAMS . Turn on headlights or other accessories. Battery voltage must not drop below 13 volts. If voltage drops below 13 volts, replace generator.
GENERATOR SPECIFICATIONS
| Application | Rated Output (Amps) |
|---|---|
| Amigo, Rodeo 2.2L | N/A |
| Amigo, Rodeo 3.2L & Trooper | 75 |