LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1993 >> Rodeo LS, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.6L >> Code Charts >> Test No. 1 - Checking ECM Power Supply >> Inspection & Correction

Inspection & Correction

  1. If battery voltage is not present at terminals No. 1, 14 and 4, check main relay, starter switch, fuses, fusible link wires and related circuits. Correct or replace parts as necessary.
  2. If continuity does not exist between terminals No. 11 and 22, correct or replace grounding cable.
  3. Reconnect ECM harness connectors.
Fig 1: Test No. 1 - ECM Power Supply Courtesy Isuzu Motor Co
G93D78785