LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1991 >> Trooper LS, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests - EFI >> Ignition System >> Timing Control Systems >> Electronic Spark Timing (Pickup & Rodeo 3.1L, Trooper 2.8L)

Electronic Spark Timing (Pickup & Rodeo 3.1L, Trooper 2.8L)

  1. To check system operation, check timing at 1500 RPM with ALDL ungrounded. Locate ALDL connector.
  2. ALDL is located below left side of instrument panel (Pickup and Rodeo) or below center console (Trooper). See Fig 1 .
  3. Install jumper wire between terminals "A" and "B" of ALDL connector. See Fig 1 . Note timing at 1500 RPM. If timing changes, system is operating correctly.
NOTE: If a problem develops with EST, ECM will set Code 42. For additional testing procedures, see appropriate G - EFI TESTS W/ CODES article in the ENGINE PERFORMANCE Section.
Fig 1: Grounding ALDL Connector (Trooper 2.8L; P/U & Rodeo 3.1L Similar)
G122379Courtesy of ISUZU MOTOR CO.