LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1990 >> Trooper LS, 2.8 R, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.8L >> Diagnostic Circuit Check >> Code 42: Electronic Spark Timing >> Diagnostic Aids

Diagnostic Aids

If a Code 42 was stored and hard start problem occurs, problem is most likely a grounded EST line (circuit No. 423). "Scan" tester does not have the ability to help diagnose a Code 42 problem. A PROM not fully seated in the ECM can result in a Code 42. For intermittents, see INTERMITTENTS in TESTS W/O CODES - EFI article.

Fig 1: Code 42: Circuit & Flow Chart, Electronic Spark Timing
G122219Courtesy of ISUZU MOTOR CO.