LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1990 >> Trooper LS, 2.8 R, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.8L >> Diagnostic Circuit Check >> Code 34: Map Sensor (Signal Volt Lo) >> Diagnostic Aids

Diagnostic Aids

An intermittent open in circuits No. 432 or 416 will result in a Code 34. With ignition on and engine off, voltages should be within the values shown on the test chart. If MAP sensor fails (or if MAP is unplugged), ECM will substitute a fixed MAP value and use the TPS to control fuel delivery. For intermittent inspection, see INTERMITTENTS under TESTS W/O CODES - EFI article.

Fig 1: Code 34: Circuit & Flow Chart, MAP Sensor (Signal Volt Lo)
G122218Courtesy of ISUZU MOTOR CO.