LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1990 >> Trooper LS, 2.8 R, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.8L >> Diagnostic Circuit Check >> Code 14: Coolant Temp Sensor, Hi Temp Indicated >> Diagnostic Aids

Diagnostic Aids

Check harness routing for a potential short to ground in circuit No. 410. After engine is started, temperature should rise steadily to about 194°F (90°C), then stabilize when thermostat opens. For intermittents, see INTERMITTENTS under TESTS W/O CODES - EFI article.

Fig 1: Code 14: Circuit & Flow Chart, CTS (Hi Temp Indicated)
G122211Courtesy of ISUZU MOTOR CO.