LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 1990 >> Trooper LS, 2.8 R, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.8L >> Diagnostic Circuit Check >> Chart A-1: No "Check Engine" Light >> Notes

Chart A-1: No "Check Engine" Light: Notes

There should always be a steady "CHECK ENGINE" light when the ignition is on and engine stopped. The Electronic Control Module (ECM) will also turn on the light if ECM senses a malfunction, or ECM fails.

NOTE: Test numbers refer to test numbers on diagnostic chart.

Battery voltage at circuit No. 5 is protected by a 10-amp in-line fuse. Using a test light connected to 12 volts, probe each of the system ground circuits to be sure a good ground is present.