Removal and Installation: Installation
Installation is in the reverse order of removal.
- Temporarily tighten bolts and nut, then tighten nut and bolts in the specified numerical order.
Nut
: 64.7 N.m (6.6 kg-m, 48 ft-lb)
Bolts
: 28.0 N.m (2.9 kg-m, 21 ft-lb)
: Front
CAUTION:
Be sure to tighten "B" terminal nut carefully.
- Install generator and check tension of the belt. Refer to Checking Drive Belt .
- Check the wheel alignment. Refer to Inspection .