Inspection After Disassembly
Boot
- Check boot for cracks, and replace it if a malfunction is detected.
Steering Gear
- Check steering gear housing for damage and scratches (inner wall). Replace if there are.
Outer Socket and Inner Socket
- Check the following items and replace component if it does not meet standard:
BALL JOINT SWINGING FORCE:
Hook a spring balance at the point and pull the spring balance. Make sure that the spring balance reads the specified value when ball stud and inner socket start to move. Replace outer socket and inner socket if they are outside standard.
Measuring point of outer socket 1
: Ball stud upper side A
Measuring point of inner socket 2
: Point B shown in figure
Swinging force (spring balance measurement)
: Refer to Steering Gear .
BALL JOINT ROTATING FORCE
Rotating torque
: Refer to Steering Gear .
BALL JOINT AXIAL END PLAY
Axial end play
: Refer to Steering Gear .