LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2021 >> Q50 Pure, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (6 Of 6) >> Engine (ECM) >> P26A3 Multi-Way Control Valve Motor >> DTC Diagnosis Procedure >> VR30DDTT engine

VR30DDTT engine

  1. CHECK DTC PRIORITY 
    • If DTC P26A3 is displayed with DTC P0643 first perform the trouble diagnosis for DTC P0643.
    • If DTC P26A3 is displayed with DTC P26A5, P26A6, and/or P26A7 first perform the trouble diagnosis for DTC P26A5, P26A6, and/or P26A7.

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable.

    NO

    GO TO 2.

  2. CHECK MULTI-WAY CONTROL VALVE MOTOR OUTPUT SIGNAL CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect multi-way control valve harness connector and ECM harness connector.
    3. Check the continuity between multi-way control valve harness connector and ECM harness connector.

      +

      -

      Continuity

      Multi-way control valve

      ECM

      Connector

      Terminal

      Connector

      Terminal

      F117

      1

      F142

      145

      Existed

      2

      146

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    Repair or replace error-detected parts.

  3. CHECK MULTI-WAY CONTROL VALVE MOTOR 

    Check the multi-way control valve motor. Refer to Component Inspection .

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace multi-way control valve. Refer to MULTI-WAY CONTROL VALVE : Exploded View .