DTC Detection Logic
| DTC | Display item | Malfunction detected condition | Possible cause |
|---|---|---|---|
| P1832 | TCS OP SIG | Malfunction is detected in TCS operation signal that is output from ABS actuator and electric unit (control unit) through CAN communication. | Malfunction of TCS system |
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
: GO TO 2.
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Start the engine and drive at 30 km/h (19 MPH) or more.
- Perform self-diagnosis for "ALL MODE AWD/4WD".
Is DTC "P1832" detected?
YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END