DTC Confirmation Procedure
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
: GO TO 2.
- DTC REPRODUCTION PROCEDURE
With CONSULT
- Start the engine.CAUTION: Never drive the vehicle.
- Turn the 4WD shift switch AUTO→4H→4L→4H→AUTO.
- Drive at 20 km/h (12 MPH) or more for 1 minute or more.
- Perform self-diagnosis for "ALL MODE AWD/4WD".
Is DTC "P182A" detected?
YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Start the engine.