LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2014 >> QX80 AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> DTC/Circuit Diagnosis >> DTC P181A: Transfer Motor Temperature Sensor >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 

    With CONSULT 

    1. Start the engine and drive at 40 km/h (25 MPH) or more for approximately 1 minute.
    2. Perform self-diagnosis for "ALL MODE AWD/4WD".

      Is DTC "P181A" detected? 

      YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END