LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> M35h >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Security Control System) >> Symptom Diagnosis >> Panic Alarm Function Does Not Operate >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK REMOTE KEYLESS ENTRY FUNCTION

    Check remote keyless entry function. Refer to "REMOTE KEYLESS ENTRY FUNCTION: SYSTEM DESCRIPTION ".

    Does door lock or unlock when operating Intelligent key button? 

    YES: GO TO 2.

    NO: Go to DLK-114, "Diagnosis Procedure".

  2. CHECK VEHICLE SECURITY ALARM OPERATION

    Check vehicle security alarm operation. Refer to "VEHICLE SECURITY SYSTEM: System Description ".

    Is alarm (headlamps and horns) activated? 

    YES: GO TO 3.

    NO: Go to "Diagnosis Procedure ".

  3. CHECK "PANIC ALARM" BUTTON OPERATION
    1. Turn ignition switch ON.
    2. Select "RKE-PANIC" and "RKE OPE COUN1" in "Data Monitor" mode of "INTELLIGENT KEY" of "BCM" using CONSULT.
    3. Check "RKE-PANIC" and "RKE OPE COUN1" indications when pressing (for approximately 0.5 seconds) "PANIC ALARM" button of Intelligent Key.
    Indication Specification
    RKE-PANIC OFF → ON
    RKE OPE COUN1 Increases

    Is the inspection result normal? 

    YES: GO TO 4.

    NO: Replace Intelligent Key.

  4. CONFIRM THE OPERATION

    Confirm the operation again.

    Is the result normal? 

    YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

    NO: GO TO  1.