LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> M35h >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Security Control System) >> DTC/Circuit Diagnosis >> Hood Switch >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HOOD SWITCH SIGNAL CIRCUIT 1
    1. Turn ignition switch OFF.
    2. Disconnect hood switch connector.
    3. Check voltage between hood switch harness connector and ground.
    (+) (-) Voltage (V) (Approx.)
    Hood switch
    Connector Terminal
    E30 2 Ground 12

    Is the inspection result normal? 

    YES: GO TO  3.

    NO: GO TO 2.

  2. CHECK HOOD SWITCH SIGNAL CIRCUIT 2
    1. Disconnect IPDM E/R connector.
    2. Check continuity between IPDM E/R harness connector and hood switch harness connector.
      IPDM E/R Hood switch Continuity
      Connector Terminal Connector Terminal
      E5 24 E30 2 Existed
    3. Check continuity between IPDM E/R harness connector and ground.
    IPDM E/R Ground Continuity
    Connector Terminal
    E5 24 Not existed

    Is the inspection result normal? 

    YES: Replace IPDM E/R. Refer to "REMOVAL AND INSTALLATION ".

    NO: Repair or replace harness.

  3. CHECK HOOD SWITCH GROUND CIRCUIT

    Check continuity between hood switch harness connector and ground.

    Hood switch Ground Continuity
    Connector Terminal
    E30 1 Existed

    Is the inspection result normal? 

    YES: Replace hood lock (RH). Refer to "HOOD LOCK: REMOVAL AND INSTALLATION ".

    NO: Repair or replace harness.