LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> M35h >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Security Control System) >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ENGINE START FUNCTION
    1. Check that DTC except for DTC P1610 is not detected.

      If detected, erase the DTC after fixing.

    2. Turn ignition switch OFF.
    3. Contact the registered Intelligent Key backside to push-button ignition switch and wait 5 seconds.
    4. Turn ignition switch ON.
    5. Turn ignition switch OFF and wait 5 seconds.
    6. Repeat steps  3 and 5 twice (a total of 3 times).
    7. Check that vehicle can be set to READY.

    : INSPECTION END