LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Unit Disassembly And Assembly >> Oil Pump, 2346 Brake, Front Brake Piston >> Disassembly

Oil Pump, 2346 Brake, Front Brake Piston: Disassembly

  1. Remove snap ring (1) from oil pump assembly using a flat-bladed screwdriver (A).
    CAUTION:
    • Be careful not to scratch oil pump cover and 2346 brake retaining plate.
    • Be careful not to damage snap ring.
    Fig 1: Removing Oil Pump Assembly Snap Ring Using Flat-Bladed Screwdriver
    G09002048Courtesy of NISSAN NORTH AMERICA, INC.
  2. Remove 2346 brake component part (retaining plate, drive plates, driven plates, and dish plate) (1) from oil pump assembly.
    Fig 2: Removing Oil Pump Assembly Brake Components
    G09002049Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove seal ring (1) from oil pump assembly.
    Fig 3: Locating Oil Pump Assembly Seal Ring
    G09002050Courtesy of NISSAN NORTH AMERICA, INC.
  4. Set the clutch spring compressor (SST: KV31103800) (A) on front brake spring retainer and remove snap ring (fixing front brake spring retainer) (1) from oil pump assembly while compressing return spring.
    CAUTION: Be careful not to expand snap ring excessively.
    Fig 4: Removing Oil Pump Assembly Snap Ring
    G09002051Courtesy of NISSAN NORTH AMERICA, INC.
  5. Remove front brake spring retainer (1) from oil pump assembly.
    Fig 5: Removing Oil Pump Assembly Front Brake Spring Retainer
    G09002052Courtesy of NISSAN NORTH AMERICA, INC.
  6. Set the clutch spring compressor [SST: KV31102400 (J-34285 and J-34285-87)] (A) on 2346 brake spring retainer and remove snap ring (fixing 2346 brake spring retainer) (1) from oil pump assembly while compressing return spring.
    Fig 6: Removing Snap Ring From Oil Pump Assembly
    G09002053Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Be careful not to expand snap ring excessively.
  7. Remove 2346 brake spring retainer (1) from oil pump assembly.
    Fig 7: Removing 2346 Brake Spring Retainer From Oil Pump Assembly
    G09002054Courtesy of NISSAN NORTH AMERICA, INC.
  8. Remove front brake piston (1) from oil pump assembly with compressed air. Refer to "OIL CHANNEL ".
    Fig 8: Removing Front Brake Piston From Oil Pump Assembly Using Compressed Air
    G09002055Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Care should be taken not to abruptly blow air. It makes piston incline, as the result, it becomes hard to disassemble the piston.
  9. Remove D-ring (inner) (1) and D-ring (outer) (2) from front brake piston.
    Fig 9: Locating Front Brake Piston D-Ring (Inner\Outer)
    G09002056Courtesy of NISSAN NORTH AMERICA, INC.
  10. Remove 2346 brake piston (1) from oil pump assembly with compressed air. Refer to "OIL CHANNEL ".
    Fig 10: Removing 2346 Brake Piston From Oil Pump Assembly Using Compressed Air
    G09002057Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Care should be taken not to abruptly blow air. It makes piston incline, as the result, it becomes hard to disassemble the piston.
  11. Remove D-ring (large) (1) and D-ring (small) (2) from 2346 brake piston.
    Fig 11: Locating Brake Piston D-Ring (Large\Small)
    G09002058Courtesy of NISSAN NORTH AMERICA, INC.
  12. loosen bolts in numerical order shown in the figure below and remove oil pump housing from oil pump cover.
    Fig 12: Oil Pump Housing Mounting Bolts Loosening Sequence
    G09002059Courtesy of NISSAN NORTH AMERICA, INC.
  13. Remove oil pump housing oil seal using a flat-bladed screwdriver.
    CAUTION: Be careful not to scratch oil pump housing.
    Fig 13: Removing Oil Pump Housing Oil Seal Using Flat-Bladed Screwdriver
    G09002060Courtesy of NISSAN NORTH AMERICA, INC.
  14. Remove O-ring from oil pump housing.
    Fig 14: Removing Oil Pump Housing O-Ring
    G09002061Courtesy of NISSAN NORTH AMERICA, INC.
  15. Remove O-ring (1) from oil pump cover.
    Fig 15: Removing Oil Pump Cover O-Ring
    G09002062Courtesy of NISSAN NORTH AMERICA, INC.