LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2013 >> FX37 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Unit Disassembly And Assembly >> Oil Pump, 2346 Brake, Front Brake Piston >> Assembly

Oil Pump, 2346 Brake, Front Brake Piston: Assembly

  1. Install O-ring (1) to oil pump cover.
    Fig 1: Installing Oil Pump Cover O-Ring
    G09002063Courtesy of NISSAN NORTH AMERICA, INC.
  2. Install O-ring to oil pump housing.
    Fig 2: Installing Oil Pump Housing O-Ring
    G09002064Courtesy of NISSAN NORTH AMERICA, INC.
  3. Using the drift, install oil pump housing oil seal to the oil pump housing until it is flush.
    CAUTION:
    • Never reuse oil seal.
    • Apply ATF to oil seal.
    Fig 3: Installing Oil Seal To Oil Pump Housing Using Drift
    G09002065Courtesy of NISSAN NORTH AMERICA, INC.
  4. Install oil pump housing to oil pump cover and tighten bolts (←) to the specified torque in numerical order shown in the figure after temporarily tightening them.
    Fig 4: Oil Pump Housing Mounting Bolts Tightening Sequence
    G09002066Courtesy of NISSAN NORTH AMERICA, INC.
  5. Install D-ring (large) (1) and D-ring (small) (2) to 2346 brake piston.
    Fig 5: Locating Brake Piston D-Ring (Large\Small)
    G09002067Courtesy of NISSAN NORTH AMERICA, INC.
  6. Install 2346 brake piston (1) to oil pump assembly.
    Fig 6: Installing Brake Piston To Oil Pump Assembly
    G09002068Courtesy of NISSAN NORTH AMERICA, INC.
  7. Install D-ring (inner) (1) and D-ring (outer) (2) to front brake piston.
    Fig 7: Locating Front Brake Piston D-Ring (Inner\Outer)
    G09002069Courtesy of NISSAN NORTH AMERICA, INC.
  8. Install front brake piston (1) to oil pump assembly.
    Fig 8: Installing Front Brake Piston To Oil Pump Assembly
    G09002070Courtesy of NISSAN NORTH AMERICA, INC.
  9. Install 2346 brake spring retainer (1) to oil pump assembly.
    Fig 9: Installing 2346 Brake Spring Retainer To Oil Pump Assembly
    G09002071Courtesy of NISSAN NORTH AMERICA, INC.
  10. Set the clutch spring compressor [SST: KV31102400 (J-34285 and J-34285-87)] (A) on 2346 brake spring retainer and install snap ring (fixing 2346 brake spring retainer) (1) to oil pump assembly while compressing return spring.
    Fig 10: Installing Snap Ring To Oil Pump Assembly
    G09002072Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Be careful not to expand snap ring excessively.
  11. Install front brake spring retainer (1) to oil pump assembly.
    Fig 11: Installing Oil Pump Assembly Front Brake Spring Retainer
    G09002073Courtesy of NISSAN NORTH AMERICA, INC.
  12. Set the clutch spring compressor (SST: KV31103800) (A) on front brake spring retainer and install snap ring (fixing front brake spring retainer) (1) to oil pump assembly while compressing return spring.
    CAUTION: Be careful not to expand snap ring excessively.
    Fig 12: Installing Oil Pump Assembly Snap Ring
    G09002074Courtesy of NISSAN NORTH AMERICA, INC.
  13. Install seal ring (1) to oil pump assembly.
    Fig 13: Locating Oil Pump Assembly Seal Ring
    G09002075Courtesy of NISSAN NORTH AMERICA, INC.
  14. Install 2346 brake component part (retaining plate, drive plates, driven plates, and dish plate) to oil pump assembly.
    Fig 14: Identifying Retaining Plate, Drive Plates, Driven Plates And Dish Plate
    G09002076Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Check the order of plates.
  15. Install snap ring (1) to oil pump assembly using a flat-bladed screwdriver (A).
    Fig 15: Installing Oil Pump Assembly Snap Ring Using Flat-Bladed Screwdriver
    G09002077Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Never install snap ring mating part (A) to the clearance groove [(B) shown in the figure below] of oil pump cover.
    Fig 16: Identifying Snap Ring Mating Part And Clearance Groove
    G09002078Courtesy of NISSAN NORTH AMERICA, INC.