High And Low Reverse Clutch: Assembly
- Install high and low reverse clutch component part (dish plate, drive plates, driven plates, and retaining plate) to high and low reverse clutch drum.Fig 1: Identifying High And Low Reverse Clutch Dish Plate, Drive Plates, Driven Plates And Retaining Plate
Courtesy of NISSAN NORTH AMERICA, INC.
CAUTION: Check the order of plates. - Install snap ring to high and low reverse clutch drum using a flat-bladed screwdriver.CAUTION:
- Be careful not to scratch high and low reverse clutch drum.
- Be careful not to damage snap ring.
- Install bearing race to high and low reverse clutch drum.CAUTION: Check the direction of needle bearing. Refer to "LOCATION OF NEEDLE BEARINGS AND BEARING RACES ".