LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> G25 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (EV Control System) >> Removal And Installation >> Dc/Dc-J/B >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.

Pay attention to the following and install by following the procedure for removal in the reverse order.

WARNING: To prevent shock hazards, be sure to put on insulating protective gear before beginning work on the high voltage system.
CAUTION:
  • Be sure to reinstall high voltage harness clips in their original positions. If a clip is damaged, replace it with a new clip before installing.
  • Be sure to perform correct air bleeding after adding coolant. Refer to "DRAINING AND REFILLING ".