Diagnosis Procedure
- CHECK IMMEDIATE CHARGING SWITCH ILLUMINATION FUNCTION
- Turn power switch ON.
- Turn ON the headlamp.
- Check that the immediate charging switch illumination lights up.
Is the inspection result normal?
YES: Go to 6.
NO: Go to 2.
- CHECK IMMEDIATE CHARGING SWITCH ILLUMINATION POWER SUPPLY
Check the voltage between immediate charging switch and ground.
VOLTAGE REFERENCE CHART+ - Voltage Immediate charging switch Connector Terminal M65 3 Ground Battery voltage Is the inspection result normal?
YES: Go to 5.
NO: Go to 3.
- CHECK FUSE
- Turn power switch OFF.
- Turn OFF the headlamp.
- Pull out #47 fuse.
- Check that the fuse is not fusing.
Is the inspection result normal?
YES: Go to 4.
NO: Replace the fuse after repair the applicable circuit.
- CHECK IMMEDIATE CHARGING SWITCH ILLUMINATION POWER SUPPLY CIRCUIT
- Disconnect immediate charging switch harness connector.
- Check the continuity between immediate charging switch harness connector and fuse harness connector.
CONTINUITY REFERENCE CHART+ - Continuity Immediate charging switch Connector Terminal M65 3 #47 fuse terminal Existed Is the inspection result normal?
YES: Check power supply circuit.
NO: Repair or replace error-detected parts.
- CHECK IMMEDIATE CHARGING SWITCH GROUND CIRCUIT
- Turn power switch OFF.
- Turn OFF the headlamp.
- Disconnect immediate charging switch harness connector.
- Check the continuity between immediate charging switch harness connector and ground.
CONTINUITY REFERENCE CHART+ - Continuity Immediate charging switch Connector Terminal M65 4 Ground Existed Is the inspection result normal?
YES: Replace immediate switch. Refer to "REMOVAL AND INSTALLATION ".
NO: Repair or replace error-detected parts.
- CHECK IMMEDIATE CHARGING SWITCH POWER SUPPLY
- Turn power switch OFF.
- Turn OFF the headlamp.
- Disconnect immediate charging switch harness connector.
- Check the voltage between immediate charging switch and ground.
VOLTAGE REFERENCE CHART+ - Voltage Immediate charging switch Connector Terminal M65 1 Ground Battery voltage Is the inspection result normal?
YES: Go to 9.
NO: Go to 7.
- CHECK FUSE
- Pull out #13 fuse.
- Check that the fuse is not fusing.
Is the inspection result normal?
YES: Go to 8.
NO: Replace the fuse after repair the applicable circuit.
- CHECK IMMEDIATE CHARGING SWITCH POWER SUPPLY CIRCUIT
Check the continuity between immediate charging switch harness connector and fuse harness connector.
CONTINUITY REFERENCE CHART+ - Continuity Immediate charging switch Connector Terminal M65 1 #13 fuse terminal Existed Is the inspection result normal?
YES: Check power supply circuit.
NO: Repair or replace error-detected parts.
- CHECK IMMEDIATE CHARGING SWITCH SIGNAL CIRCUIT
- Disconnect VCM harness connector.
- Check the continuity between immediate charging switch harness connector and VCM harness connector.CONTINUITY REFERENCE CHART
+ - Continuity Immediate charging switch VCM Connector Terminal Connector Terminal M65 1 E63 89 Existed - Also check harness for short to ground and short to power.
Is the inspection result normal?
YES: Go to 10.
NO: Repair or replace error-detected parts.
- CHECK IMMEDIATE CHARGING SWITCH
Perform component inspection. Refer to "COMPONENT INSPECTION (IMMEDIATE CHARGING SWITCH) ".
Is the inspection result normal?
YES: INSPECTION END
NO: Replace immediate charging switch. Refer to "REMOVAL AND INSTALLATION ".