Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK BATTERY TEMPERATURE SENSOR POWER SUPPLY
- Turn power switch OFF.
- Disconnect battery current sensor harness connector.
- Turn power switch ON.
- Check the voltage between battery current sensor harness connector and ground.
VOLTAGE REFERENCE CHART+ - Voltage (Approx.) Battery current sensor Connector Terminal E66 2 Ground 5 V Is the inspection result normal?
YES: Go to 3.
NO: Go to 2.
- CHECK BATTERY TEMPERATURE SENSOR POWER SUPPLY CIRCUIT
- Turn ignition switch OFF.
- Disconnect VCM harness connector.
- Check the continuity between battery current sensor harness connector and VCM harness connector.CONTINUITY REFERENCE CHART
+ - Continuity Battery current sensor VCM Connector Terminal Connector Terminal E66 2 E62 50 Existed - Also check harness for short to ground and short to power.
Is the inspection result normal?
YES: Perform the trouble diagnosis for power supply circuit.
NO: Repair or replace error-detected parts.
- CHECK BATTERY TEMPERATURE SENSOR GROUND CIRCUIT
- Turn ignition switch OFF.
- Disconnect VCM harness connector.
- Check the continuity between battery current sensor harness connector and VCM harness connector.CONTINUITY REFERENCE CHART
+ - Continuity Battery current sensor VCM Connector Terminal Connector Terminal E66 3 E62 43 Existed - Also check harness for short to power.
Is the inspection result normal?
YES: Go to 4.
NO: Repair or replace error-detected parts.
- CHECK BATTERY TEMPERATURE SENSOR
Check the battery temperature sensor. Refer to "COMPONENT INSPECTION ".
Is the inspection result normal?
YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".
NO: Replace battery current sensor. Refer to "REMOVAL AND INSTALLATION ".