Component Inspection
WARNING: This page is about a different car, the 2011 Nissan Leaf. However, it is still accessible from the selected car via links, so may be relevant.
- WARNING BUZZER INSPECTION
- Turn the power switch OFF.
- Close all doors including the back door, and wait outside of vehicle for 5 minutes or more.
- Disconnect buzzer harness connector.
- Apply voltage of 12 V between warning buzzer connector terminals 1 and 2.
VOLTAGE REFERENCECondition Warning buzzer Voltage applied Sound Voltage not applied No sound Is the inspection result normal?
YES: INSPECTION END
NO: Replace the warning buzzer.