LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 Base, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (VQ37VHR) - Introduction (2 Of 2) >> Ignition Signal >> Component Inspection (Condenser)

Component Inspection (Condenser)

  1. CHECK CONDENSER
    1. Turn ignition switch OFF.
    2. Disconnect condenser harness connector.
    3. Check resistance between condenser terminals as per the following.
    TERMINAL RESISTANCE REFERENCE CHART

    Terminals Resistance (MΩ)
    1 and 2 Above 1 [at 25°C (77°F)]

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace condenser.