LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 Base, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (VQ37VHR) - DTC P0196 Through P0850 >> DTC P0456: EVAP Control System >> Component Inspection

Component Inspection

  1. CHECK FUEL TANK VACUUM RELIEF VALVE
    1. Turn ignition switch OFF.
    2. Remove fuel filler cap. Refer to "EXPLODED VIEW ".
    3. Wipe clean valve housing.
      Fig 1: Identifying Spring Pressure Valve, Vaccum Valve, Plate And Gasket
      G07168991Courtesy of NISSAN MOTOR CO., U.S.A.
    4. Check valve opening pressure and vacuum.

    Pressure: 15.3 - 20.0 kPa (0.156 - 0.204 kg/cm 2  , 2.22 - 2.90 psi) 

    Vacuum: -6.0 to -3.3 kPa (-0.061 to -0.034 kg/cm 2  , -0.87 to -0.48 psi) 

    Fig 2: Checking Valve Opening Pressure And Vacuum
    G07168992Courtesy of NISSAN MOTOR CO., U.S.A.

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: GO TO 2.

  2. REPLACE FUEL FILLER CAP

    Replace fuel filler cap. Refer to "EXPLODED VIEW ".

    CAUTION: Use only a genuine fuel filler cap as a replacement. If an incorrect fuel filler cap is used, the MIL may illuminate.

    INSPECTION END