LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> M45 x >> Repair and Diagnosis >> Transmission >> Transfer Case >> Service Information >> Trouble Diagnosis For System >> DTC C1210 Engine Control Signal >> Diagnostic Procedure

Diagnostic Procedure

  1. CHECK DTC WITH ECM

    Perform self-diagnosis with ECM.

    Is any malfunction detected by self-diagnosis? 

    YES: Check the malfunctioning system.

    NO: GO TO 2.

  2. CHECK AWD CONTROL UNIT

    Check AWD control unit input/output signal. Refer to "AWD CONTROL UNIT INPUT/OUTPUT SIGNAL REFERENCE VALUE ".

    OK or NG 

    OK: GO TO 3.

    NG: Check AWD control unit pin terminals for damage or loose connection with harness connector. If any items are damaged, repair or replace damaged parts.

  3. CHECK DTC

    Perform the self-diagnosis, after driving a vehicle for a while.

    OK or NG 

    OK: INSPECTION END 

    NG: Perform self-diagnosis with ECM again.