LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTC P0182 Through P0850 >> DTC P0555: Brake Booster Pressure Sensor >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK GROUND CONNECTION
    1. Turn ignition switch OFF.
    2. Check ground connection M95. Refer to Ground Inspection in "CIRCUIT INSPECTION ".

      Is the inspection result normal? 

      YES: GO TO 2.

      NO: Repair or replace ground connection.

  2. CHECK BRAKE BOOSTER PRESSURE SENSOR POWER SUPPLY CIRCUIT
    1. Disconnect brake booster pressure sensor harness connector.
    2. Turn ignition switch ON.
    3. Check the voltage between brake booster pressure sensor harness connector and ground.
      TERMINAL VOLTAGE REFERENCE CHART

      Brake booster pressure sensor Ground Voltage (V)
      Connector Terminal
      E48 1 Ground Approx. 5

      Is the inspection result normal? 

      YES: GO TO  9.

      NO: GO TO 3.

  3. CHECK BRAKE BOOSTER PRESSURE SENSOR POWER SUPPLY CIRCUIT-II
    1. Turn ignition switch OFF.
    2. Disconnect ECM harness connector.
    3. Check the continuity between Brake booster pressure sensor harness connector and ECM harness connector.
      TERMINAL CONTINUITY REFERENCE CHART

      Brake booster pressure sensor ECM Continuity
      Connector Terminal Connector Terminal
      E48 1 F101 45 Existed

      Is the inspection result normal? 

      YES: GO TO  5.

      NO: GO TO 4.

  4. DETECT MALFUNCTIONING PART

    Check the following.

    • Harness connectors F1, E3
    • Harness for open between ECM and brake booster pressure sensor

      Repair open circuit.

  5. CHECK SENSOR POWER SUPPLY CIRCUIT

    Check harness for short to power and short to ground, between the following terminals.

    TERMINAL REFERENCE CHART

    ECM Sensor
    Connector Terminal Name Connector Terminal
    F101 45 Brake booster pressure sensor E48 1
    46 CKP sensor (POS) F2 1
    M107 103 APP sensor E112 6
    107 EVAP control system pressure sensor B30 3
    Refrigerant pressure sensor E77 3

    Is the inspection result normal? 

    YES: GO TO 6.

    NO: Repair short to ground or short to power in harness or connectors.

  6. CHECK COMPONENTS

    Check the following.

  7. CHECK APP SENSOR

    Refer to "COMPONENT INSPECTION ".

    Is the inspection result normal? 

    YES: GO TO  14.

    NO: GO TO 8.

  8. REPLACE ACCELERATOR PEDAL ASSEMBLY
    1. Replace accelerator pedal assembly
    2. Go to "SPECIAL REPAIR REQUIREMENT ".

      INSPECTION END

  9. CHECK BRAKE BOOSTER PRESSURE SENSOR GROUND CIRCUIT FOR OPEN AND SHORT
    1. Turn ignition switch OFF.
    2. Disconnect ECM harness connector.
    3. Check the continuity between brake booster pressure sensor harness connector and ECM harness connector.
      TERMINAL CONTINUITY REFERENCE CHART

      Brake booster pressure sensor ECM Continuity
      Connector Terminal Connector Terminal
      E48 3 F101 36 Existed
    4. Also check harness for short to ground and power.

      Is the inspection result normal? 

      YES: GO TO  11.

      NO: GO TO 10.

  10. DETECT MALFUNCTIONING PART

    Check the following.

    • Harness connectors F1, E3
    • Harness for open or short between brake booster pressure sensor and ECM

      Repair open circuit, short to ground or short to power in harness or connectors.

  11. CHECK BRAKE BOOSTER PRESSURE SENSOR INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT
    1. Check the continuity between brake booster pressure sensor harness connector and ECM harness connector.
      TERMINAL CONTINUITY REFERENCE CHART

      Brake booster pressure sensor ECM Continuity
      Connector Terminal Connector Terminal
      E48 2 F101 39 Existed
    2. Also check harness for short to ground and power.

      Is the inspection result normal? 

      YES: GO TO  13.

      NO: GO TO 12.

  12. DETECT MALFUNCTIONING PART

    Check the following.

    • Harness connectors F1, E3
    • Harness for open or short between brake booster pressure sensor and ECM

      Repair open circuit, short to ground or short to power in harness or connectors.

  13. CHECK BRAKE BOOSTER PRESSURE SENSOR

    Refer to "COMPONENT INSPECTION ".

    Is the inspection result normal? 

    YES: GO TO 14.

    NO: Replace brake booster pressure sensor.

  14. CHECK INTERMITTENT INCIDENT

    Refer to "INTERMITTENT INCIDENT ".

    INSPECTION END

scientia non olet · About LEMON Manuals