LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2009 >> QX56 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0327 To P0850 >> DTC P0340: CMP Sensor (Phase) >> Component Inspection >> Camshaft Position Sensor (Phase)

Camshaft Position Sensor (Phase)

  1. Loosen the fixing bolt of the sensor.
  2. Disconnect camshaft position sensor (PHASE) harness connector.
  3. Remove the sensor.
  4. Visually check the sensor for chipping.
    Fig 1: Checking Camshaft Position Sensor For Chipping
    G06315609Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Check resistance as shown in the figure.
    RESISTANCE REFERENCE CHART

    Terminal No. (Polarity) Resistance Ω [at 25°C (77°F)]
    3 (+) - 1 (-) Except 0 or ∞
    2 (+) - 1 (-)
    3 (+) - 2 (-)
    Fig 2: Checking Camshaft Position Sensor Resistance
    G06315610Courtesy of NISSAN MOTOR CO., U.S.A.