Door Mirror: Disassembly
- Place the mirror body with mirror glass facing upward.
- Put a strip of protective tape B on mirror body.
- As shown in the figure, insert a small slotted screwdriver A into the recess between mirror base (mirror holder)(1) and mirror holder bracket (2). Push up two pawls (3) to remove mirror holder lower half side.NOTE: When pushing up pawls do not attempt to use one recess only, be sure to push up with both recesses.
Insert screwdriver into recesses, and push up while rotating (twisting) to make work easier.
- Remove two terminals of mirror heater attachment.
- Lightly lift up lower side of mirror surface from mirror surface, and detach two pawls of upper side as if pulling it out. Remove mirror surface from mirror body.NOTE: Be careful not to allow grease on sealing agent in center of mirror body assembly (actuator) or back side of mirror surface (mirror holder).
- Remove the clips and mirror cover from the housing.