LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Engine Control System) >> Trouble Diagnosis >> ECM Terminals and Reference Value >> Preparation

ECM Terminals and Reference Value: Preparation

WARNING: This page is about a different car, the 2004 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
  1. ECM is located behind the passenger side instrument lower panel. For this inspection, remove passenger side instrument lower panel.
  2. Remove ECM harness connector.
    Fig 1: Locating ECM & ECM Harness Connector
    G00344514Courtesy of NISSAN MOTOR CO., U.S.A.
  3. When disconnecting ECM harness connector, loosen it with levers as far as they will go as shown in Fig 2 .
  4. Connect a break-out box (SST) and Y-cable adapter (SST) between the ECM and ECM harness connector.
    • Use extreme care not to touch 2 pins at one time.
    • Data is for comparison and may not be exact.
    Fig 2: Loosening Levers & Disconnecting ECM Harness Connector
    G00344515Courtesy of NISSAN MOTOR CO., U.S.A.