Inspection Procedure
NOTE:
Perform DATA MONITOR (SPEC) mode in maximum scale display.
- Perform BASIC INSPECTION. See ON-VEHICLE ADJUSTMENTS article. Ensure conditions described in TESTING CONDITIONS are met.
- Select B/FUEL SCHDL, A/F ALPHA-B1 and MAS A/F SE-B1 in DATA MONITOR (SPEC) mode with CONSULT-II.
- Compare readings on CONSULT-II screen to specifications in appropriate PID VALUE CHARTS under PIN VOLTAGE & PID VALUE CHARTS in PIN VOLTAGE CHARTS article.
- If readings are within specifications, system is okay at this time. If readings are not within specifications, perform DIAGNOSTIC PROCEDURE .