LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 1996 >> I30 Base, Automatic, RE4F04A >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests 3.0L >> Engine Sensors & Switches >> Throttle Position (TP) Sensor

Throttle Position (TP) Sensor

  1. Turn ignition off. Disconnect TP sensor harness connector. Using a DVOM, measure resistance between terminals "2" and "3" of sensor. See Fig 1 .
  2. Resistance should be approximately 500 ohms with throttle closed. As throttle is opened, resistance should gradually increase up to 4000 ohms with throttle completely open. If sensor does not respond as indicated, loosen TP sensor mounting screws. Adjust TP sensor to obtain correct resistance. If correct resistance cannot be obtained, replace TP sensor.
Fig 1: Testing TP Sensor (I30)
G96A10785Courtesy of NISSAN MOTOR CO., U.S.A.