LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2025 >> Elantra Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System - 1.6L (Except HEV)) >> Injector >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
    NOTE:
    • Do not reuse the injector fixing clip.
    • Do not reuse the mounting bolt.
    • Do not reuse the combustion seal (A).
      G16687306Courtesy of HYUNDAI MOTOR AMERICA
    • Be careful not to apply oil to the combustion seal.
    • Do not reuse the O-ring (A), support disc (B), rubber washer (C).
    • When replacing the rubber washer, the steal plate part should be faced the cylinder installation part and the rubber plate part should be faced the injector body part.
      G16687307Courtesy of HYUNDAI MOTOR AMERICA
    • Apply engine oil to the injector O-ring.
    • When inserting the injector, be careful not to damage the injector tip
    • Do not reuse the high fuel pipe.