LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2023 >> Palisade Calligraphy, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Assembly) >> Transfer Fluid >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Information 

  1. Remove the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  2. Loosen the oil filler plug (A).
    G15477564Courtesy of HYUNDAI MOTOR AMERICA
  3. Check the oil level.

    Information 

    • Oil level must be up to fill the hole, if not, add oil until it runs over.
    G15477565Courtesy of HYUNDAI MOTOR AMERICA
  4. Install the oil filler plug with new gasket.

    Tightening torque: 

    39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)

  5. Install the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")