LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Kona SEL Plus, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Control System - 1.6L) >> Ambient Temperature Sensor (ATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the front bumper.

    (Refer to Body - "FRONT BUMPER ")

  3. Disconnect the connector, an then remove the ambient temperature sensor (A).
    G12596626Courtesy of HYUNDAI MOTOR AMERICA