LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2021 >> Kona SEL Plus, FWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Tail Gate Window Glass >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  • Put on gloves to prevent hand injuries.
NOTE:
  • Use seat covers to avoid damaging any surfaces.
  1. Remove the tailgate trim.

    (Refer to LIFTGATE TRIM ")

  2. Remove the rear spoiler.

    (Refer to Body Side Molding - "REAR SPOILER ")

  3. Disconnect the hot wire connector (A).
    G12605269Courtesy of HYUNDAI MOTOR AMERICA
  4. Cut off the sealant on the edge (B) while pulling the piano wire (A) to the left and right.

    Information 

    • Put on gloves to protect your hands.
    • Heat may occur when working on the wires. Be careful not to burn your hands.
    • Be careful not to disconnect the piano wire.
    G12605270Courtesy of HYUNDAI MOTOR AMERICA
  5. Put in a piano wire (A) through the corner of the tailgate window glass and insert wire grips into both ends of the wire.
    G12605271Courtesy of HYUNDAI MOTOR AMERICA
  6. Cut off the sealant on (A-A), (B-B), (C-C), while pulling a piano wire (A) to the left and right.
    CAUTION:
    • Put on gloves to protect your hands.
    • Heat may occur when working on the wires. Be careful not to burn your hands.
    • Be careful not to disconnect the piano wire.
    G12605272Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the tailgate window glass (A).
    G12605273Courtesy of HYUNDAI MOTOR AMERICA