LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra Eco >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Double Clutch Transmission Control System - 1.4L >> Inhibitor Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Make sure vehicle does not roll before setting shift lever to "N" position.
  2. Remove the air cleaner assembly and air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY , and BATTERY TRAY ")

  4. Remove the ECM.

    (Refer to Engine Control System - "ECM ")

  5. Disconnect the inhibitor switch connector (A).
  6. Remove the shift cable mounting nut (B).
    G14116970Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the manual control lever (A) and the washer after removing a nut (B).
    G14116971Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the inhibitor assembly (A) after removing the bolts (B-2ea).
    G14116972Courtesy of HYUNDAI MOTOR AMERICA