LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra Eco >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Double Clutch Transmission Control System - 1.4L >> Inhibitor Switch >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Check that the shift lever is placed in the "N" position.
  2. Lightly tighten the inhibitor switch mounting bolts (B) after installing the inhibitor switch (A).
    G14116973Courtesy of HYUNDAI MOTOR AMERICA
  3. Lightly tighten the manual control lever mounting nut (A) after installing the manual control lever (B).
    G14116974Courtesy of HYUNDAI MOTOR AMERICA
  4. Align the hole (A) in the manual control lever with the "N" position hole (B) of the inhibitor switch and then insert the inhibitor switch guide pin (SST No.: 09480-A3800).
    G14116975Courtesy of HYUNDAI MOTOR AMERICA
  5. Tighten the bolts (B) after tightening the nut (A) with the specified torque.

    Tightening torque: 

    1. 17.7 - 24.5 N.m (1.8 - 2.5 kgf.m, 13.0 - 18.1 lb-ft)
    2. 9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
    G14116976Courtesy of HYUNDAI MOTOR AMERICA
  6. Lightly tighten the nut (B) after connected the shift cable (C) in the manual control lever (D).
  7. Push shift cable (C) lightly to "F" direction shown in illustration to eliminate free play of shift cable.
  8. Tighten the nut (B) with the specified torque.
  9. Connect the inhibitor switch connector (A).

    Tightening torque: 

    9.8 - 13.7 N.m (1.0 - 1.4 kgf.m, 7.2 - 10.1 lb-ft)

    G14116977Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the inhibitor switch guide pin (SST No.: 09480-A3800) from the hole.
  11. Install the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY TRAY , and BATTERY ")

  12. Install the ECM.

    (Engine Control System - "ECM")

  13. Install the air cleaner and air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

    CAUTION:
    • Check that operating surely at each range of the inhibitor switch corresponding to each position of shift lever.