LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra Eco >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Double Clutch Transmission Control System - 1.4L >> Gear Actuator Assembly >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • Check the details below before installing the gear actuator assembly.
    1. Check that the gear actuator is placed in the "neutral" state.
    2. Check the assembled state of the O-rings (A).
      G14116947Courtesy of HYUNDAI MOTOR AMERICA
    3. Apply gear oil to the surface of O-rings.
    4. Check the assembled state of the dowel pins (A).
      G14116948Courtesy of HYUNDAI MOTOR AMERICA
    • Perform the clutch touch point learning procedure using the GDS after replacing the clutch actuator assembly.
      G14116949Courtesy of HYUNDAI MOTOR AMERICA