LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra Eco >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 2.0L) >> Knock Sensor (KS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the knock sensor connector (A).
    G14084500Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the intake manifold. (Refer to Engine Mechanical System - "INTAKE MANIFOLD ")
  4. Remove the installation bolt (A), and then remove the sensor from the cylinder block.
    G14084501Courtesy of HYUNDAI MOTOR AMERICA