LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra Eco >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Automatic Transaxle Control System - 2.0L) >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2019 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn off the ignition switch.
  2. Remove the battery and tray.
  3. Disconnect the solenoid valve connector (A).
    G12981290Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure the resistance between solenoid valve signal terminal and ground terminal.
  5. Check that the measured resistance is within the specification.