Component Inspection: Notes
WARNING: This page is about a different car, the 2019 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition "ON" & Engine "OFF" and Using a scan tool, clear the DTC.
- Ignition "OFF".
- Disconnect the battery (-) terminal cable from the battery, and wait at least one minutes.
- Disconnect Body Sensor Mat connector.
- Substitute the Body Sensor Mat and check for proper operation.
- Is DTC present problem?
YES
- Substitute a known-good Body Sensor OCU (ECU), and check for proper operation.
If the problem is corrected, replace Body Sensor OCU (ECU) and then go to "VERIFICATION OF VEHICLE REPAIR " procedure and Go to "BODY SENSOR RESET " procedure.
NO
- Substitute a known-good Body Sensor Mat, and check for proper operation.
If the problem is corrected, replace Body Sensor Mat and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
- Substitute a known-good Body Sensor OCU (ECU), and check for proper operation.