WARNING: This page is about a different car, the 2019 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal.
NOTE:
When installing, set control shaft lever to neutral position.
Courtesy of HYUNDAI MOTOR AMERICA
When installing, apply the sealant as shown in the illustration below.
Specified sealant
: MS 721-40 or MS721-38
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
Check operating of lever of transaxle side when operating shift lever after assembly. (1-6, R)