LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra Eco >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 1.4L (4 Of 6) >> DTC P0300: Random/Multiple Cylinder Misfire Detected >> System Inspection >> Ignition System Check

Ignition System Check

  1. IG KEY "OFF".
  2. Disconnect Ignition coil connector.
  3. Do visual inspection.
    • Check contamination or damage on ignition coil.
  4. IG KEY "ON" & ENG "OFF"
  5. Measure the voltage between power terminal of ignition coil #1, #2, #3, #4 harness connector and chassis ground.
  6. Measure the voltage between control terminal of ignition coil #1, #2, #3, #4 harness connector and chassis ground.
  7. Measure the voltage between feedback terminal of ignition coil #1, #2, #3, #4 harness connector and chassis ground.

    Specification: 

    Power terminal: B+

    Control terminal: Approx. 5V

    Feedback terminal: Approx. 0V

  8. Is the measured voltage within specifications?

    YES 

    NO