LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra Eco >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 1.4L >> Fuel Tank >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Remove the rear seat cushion.

    (Refer to Rear Seat - "REAR SEAT ASSEMBLY ")

  3. Remove the fuel pump service cover (A).
    G14116779Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pump control module connector (A).
  5. Disconnect the fuel feed tube quick-connector (B).
  6. Disconnect the fuel pressure sensor connector (C).
  7. Disconnect the vapor tube quick-connector (D).
    G14116780Courtesy of HYUNDAI MOTOR AMERICA
  8. Lift the vehicle.
  9. Remove the center muffler assembly.
  10. Disconnect the fuel feed hose (A) and leveling hose (B).
  11. Disconnect the vent hose (C).
    G14116781Courtesy of HYUNDAI MOTOR AMERICA
  12. Disconnect the vapor tube quick-connector (A).
    G14116782Courtesy of HYUNDAI MOTOR AMERICA
  13. Remove the side under cover (A).
    G14116783Courtesy of HYUNDAI MOTOR AMERICA
  14. Remove the brake line bracket (A).
    G14116784Courtesy of HYUNDAI MOTOR AMERICA
  15. Support the fuel tank with a jack.
  16. Remove the fuel tank from the vehicle after removing the mounting nuts (A).
    G14116785Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the fuel tank, the fuel tank must be tilted because of interfering with coupling.