Repair Procedures: Inspection
- Turn ignition switch OFF and disconnect the negative (-) battery cable.
- Remove the fuel pump assembly.
- Check motor operation by fuel pump connector (A) connecting power (No. 2) and ground (No. 4).
Pin No Description 1 Fuel sender ground (-) 2 Fuel pressure sensor signal input 3 CAN [High] 4 Fuel pressure sensor power supply (+5V) 5 Fuel pressure sensor ground (-) 6 Fuel sender signal (+) 7 - 8 CAN [Low] 9 Ground (-) 10 Battery power (B+) - Also check that the resistance changes smoothly when the float is moved from "E" to "F".
Position Resistance (Ω) Capacity (l ) E 298 - 305 3.9 1/2 84.5 - 88.5 25.3 F 13.5 - 16.5 49.0