LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra Eco >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Idle Stop & Go (ISG) System - 1.4L >> DC/DC Converter >> Repair Procedures >> Removal >> 400W

Repair Procedures: Removal: 400W

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the luggage side trim.

    (Refer to Body - "TRUNK TRIM ")

  3. Disconnect the DC/DC converter connector (A).
  4. Remove the DC/DC converter (B) after removing the nuts.
G14116708Courtesy of HYUNDAI MOTOR AMERICA