LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2020 >> Elantra Eco >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery System - 1.4L >> Fuel Line >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Turn the ignition switch OFF, and then remove battery (-) terminal.
  3. Disconnect the fuel feed tube quick-connector (A).
    G14116836Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • Open the clamp cover (B) before disconnect the quick connector. (If the clip is applied)
    G14116837Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION:
    • When removing the quick-connnector with the clip removing tool (A), be careful not to damage the plastic clip (B).
    • If the clip is damaged, fuel line leak can be occurred due to a bad connection.
    G14116838Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the vapor hose (A) which is connected from the PCSV.
    G14116839Courtesy of HYUNDAI MOTOR AMERICA
  5. Lift the vehicle.
  6. Remove the fuel tank.

    (Refer to "FUEL TANK ")

  7. Remove the vapor tube and low fuel line fixing clip (A) by using a common driver.
    G14116840Courtesy of HYUNDAI MOTOR AMERICA
    G14116841Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the fuel line (A) after loosening the mounting bolts and brackets.
    G14116842Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the fuel line (A).
    G14116843Courtesy of HYUNDAI MOTOR AMERICA