LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra SEL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System - General Information - 2.0L >> Special Service Tools

Special Service Tools

AUTOMATIC TRANSAXLE SYSTEM SPECIAL SERVICE TOOLS

Tools (Number and name) Illustration Use
09200-3N000
Engine support fixture (Beam)
G12981105Courtesy of HYUNDAI MOTOR AMERICA
Removal and installation of the transaxle.
Use this beam (SST No.: 09200-3N000) with the supporter (SST No.: 09200-2S000).
* Permit operating with 09200-38001.
* Refer to the engine support fixture assembly drawing below.
09200-2S000
Engine support fixture (Supporter)
G12981106Courtesy of HYUNDAI MOTOR AMERICA
Removal and installation of the transaxle.
Use this supporter (SST No.: 09200-2S000) with the beam (SST No.: 09200-38001/3N000).
* Refer to the engine support fixture assembly drawing below.
09200-2W000
Adapter
G12981107Courtesy of HYUNDAI MOTOR AMERICA
Removal and installation of the transaxle.
Use this beam (SST No.: 09200-38001/3N000) with the adapter (SST No.: 09200-2W000)
* Refer to the engine support fixture assembly drawing below.
09452-26100
Oil seal installer
G12981108Courtesy of HYUNDAI MOTOR AMERICA
Installation of the differential oil seal in the transaxle case and housing side. [Using with bar (SST No. 09231-H1100)]
09231-H1100
Bar
G12981109Courtesy of HYUNDAI MOTOR AMERICA
Installation of the differential oil seal in the transaxle case and housing side. [Using with oil seal installer (SST No.: 09452-26100)]
09480-A3800
Inhibitor switch neutral fixed pin
G12981110Courtesy of HYUNDAI MOTOR AMERICA
When installing the manual control lever on the inhibitor switch, used to align the neutral position.

* Engine support fixture special tool assembly drawing 

G12981111Courtesy of HYUNDAI MOTOR AMERICA